|
INDUCTION MELTING FURNACE FOR THE MELTING OF BRASS
|
|
AVAILABLE CAPACITY:
IN KGS:
|
25 KGS TO 3 TONS
|
|
IN KW:
|
15 KW TO 1000 KW
|
|
UNIT CONSUMPTION IN PRIYANKA INDUCTION MELTING FURNACE @NORMAL CONDITIONS:
* IN ACTUAL RUNING CONDITION:
|
270 KWH/TON TO 310 KWH/TON
OF BRASS MELTING
|
|
POURING TEMP FOR BRASS :
|
1000C TO 11500C |
|
WHICH TYPE OF MAT. CAN MELT IN THE PRIYANKA INDUCTION MELTING FURNACES:
|
1. ASSORTED SCRAP OF BRASS.
2. ALLOYING WITH COPPER SCRAP & ZINK.
3. COPPER INGOT WITH ZINK ALLOYING.
4. BRASS INGOT.
5. BRASS CHIPS 100%.
|
|
RECOMMENEDED LINING FOR BRASS MELTING :
|
1. ACIDIC (SILICA LINING WITH 1% TO 2.5% BORIC ACID.)
2. NEUTRAL.
*SHOULD HAVE EXCELLENT RESISTANCE TO CHEMICAL, THERMAL AND MECHANICAL DAMAGE, WITH A LOWER SINTERING TEMP. TO SUIT TO BRASS MELTING.
|
|
APPROX REQUIRED COMPONENTS IN PERCENTAGE
PRESENT IN LING MAT. FOR. BRASS MELTING IN INDUCTION FURNACE:
|
%
|
|
AL2O3
|
< 0.2
|
|
SIO2
|
97
|
|
CAO
|
< 0.5
|
|
FE2O3
|
< 1.0
|
|
MAX. GRAIN SIZE/MM
|
4
|
|
BONDING
|
CERAMIC
|
|
SERVICE TEMP:
|
15500C TO 16000C
|
|
FORMER MATERIALS:
|
1. CASTED BRASS
2. BRASS SHEET FORMER
3. COPPER SHEET FORMER (ADVICABLE)
|
|
RECOMMENEDED CHURING (STIRRING): BASED ON
H/D RATIO IN INDUCTION MLETING FURNACE FOR BRASS MELTING
|
BRASS:
RED BRASS:
YELLOW BRASS:
|
0.07 TO 0.15
0.07 TO 0.15
0.055 TO 0.15
|
|
MODERAT CHURNING/STIRING IS ADVICABLE IN ANY CASE, FOR LOW LOSS OF BRASS, WHILE MELTING IN INDUCTION FURNACE:
|
